🧾 Description
This article explains how to set up and manage FTP services on Datalogic mobile devices running Windows CE. FTP allows for wireless file transfers between the device and a PC, which is useful for managing files without needing USB connections.
Prerequisites
- Device must be connected to a network via Wi-Fi or Ethernet dock.
- You must know the IP address of the device.
- An FTP client must be installed on the PC (e.g., FileZilla, which is free and widely used).
⚠️ Security Note: Once FTP services are started, they remain active until manually stopped or the device is cold booted. Leaving FTP services running can expose the device to unauthorized access.
🛠️ Resolution Steps
On the Windows CE Device
Open Command Prompt
- Go to Start Menu > Run.
- Type cmd and press Enter.
Start FTP Services
- At the > prompt, type the following command: services start ftp0:
- Press Enter.
- If successful, the cursor will drop to the next line without an error message.
On the PC
Open Your FTP Client
- Launch FileZilla or your preferred FTP client.
Enter Connection Details
- Host/Server: Enter the IP address of the mobile device.
- Username: anonymous
- Password: password
- Port: 21
Connect
- Click Connect.
- You should now be able to drag and drop files between the PC and the device.
Disconnect
- When finished, click Disconnect in your FTP client.
- Stop the FTP service on the device to secure it.
Stopping FTP Services
To stop FTP services manually:
- Go to Start Menu > Run, type cmd, and press Enter.
- At the > prompt, type: services stop ftp0:
- Press Enter.
Alternatively, perform a cold boot by removing the battery and pressing the reset button.
Important Notes
- Always stop FTP services when not in use.
- Ensure the device and PC are on the same network.
- Use secure credentials if supported by your FTP server app.